Ruffled neckline tutorial

Posted by & filed under Hazel, Sewing, tutorials.

IMG_3158

I had a few minutes last week while Hazel was napping and Oliver was playing happily, so I ducked into my sewing room to see what sort of trouble I could get myself into. I have a hard time leaving projects unfinished – even just overnight – so I don’t like to start a project that I know I won’t have enough time to complete in one sitting. I had about 20 minutes. I spotted a blank tank top I’d picked up at Target for $0.75 at the end of last summer (I’ve been intending to embellish it for months now) and some grey knit material I’d picked up at JoAnn’s. And just like that, I had a vision!
<span class=
Y’all this is such a fun, quick, easy, beginner project. There’s no big construction or complicated technique. It’s a pleasing, relaxing, nap-time activity that takes a tank top from boring to interesting in no time.
Join me?
<span class=
Hazel’s top had sort of a wide neck and the circumference of the neckline was 20″. I cut a 2″ wide strip the entire width of the knit fabric (60″).
The ratio I used – neckline to knit strip length – was 1:3.
This made a very full and tight ruffle, so I think you could go as little as 1:2 if you needed.
You can do this with quilting cotton too, but you’ll have to add a step of hemming or serging the long edges. Knit is great for this because it won’t fray.
(Happy hint: don’t have knit yardage laying around? Look for an old t-shirt! You can cut as many 2″ strips as you need to get a 60″ length and piece them together. That makes this project almost free!)
<span class=
Load up your sewing machine with as close a coordinating thread as you have on hand. I recommend leaving your bobbin thread white so you will be able to tell at a glance which thread is which later one.
<span class=
And set your stitch length as long as it will go.
(My stitch length is the far right number – it’s a 5).
<span class=
Now run a stitch all the way down the middle of your strip of knit fabric. This long stitch will be called a gathering stitch.
<span class=
Do your best to stay right on center.
<span class=
When you’re finished be sure to cut your threads long so they’re easy to find.
<span class=
Look at the underside of your stitch. (Remember, I kept my bobbin thread white so I would be able to find it easily.) Do you see how the white thread is just loosely held onto the fabric. This is perfect for gathering!
<span class=
Go back to your tank top (or t-shirt or whatever you’ve decided to gather) and make a mark in the center of the back with a water-soluble marker.
<span class=
Now, holding your knit fabric strip loosely in your left hand, grab the white bobbin thread with your right hand. Hold the thread firmly and start to pull the fabric away gently with your left hand. It’s gathering!
<span class=
Keep gathering (you can gather from both ends if it helps you) until you’ve made your knit strip of fabric the same length as your neckline. There is lots of forgiveness here.
If you’ve gathered it too much and the strip is too short, just pull it out a bit.
If the strip is still too long, just keep gathering until it’s short enough.
<span class=
Now, pin one end of the strip to the center back point of the neckline.
<span class=
Keep pinning all the way around
<span class=
until you get back to the center point of the back. Fold the other end of the knit strip under about 1/2″
<span class=
and pin it in place, overlapping your starting point.
Photobucket
All pinned. Don’t worry about your crazy threads. We can snip them in a minute after we stitch things in place.
Photobucket
Now, back to the machine. Set your stitch length to 3.
Photobucket
It will be helpful here to take the “skirt” off your machine so your top will fit nicely around it at the neckline.
Start at the back center point where you overlapped the two ends of the knit strip and backstitch once.
Now stitch all the way around the neckline (don’t be afraid to go nice and slowly here – I am loving how much steady control my new machine gives!), doing your very best to keep your stitch right on center. It may help to use two fingers to keep the ruffles down and to help them go under the presser foot evenly.
Photobucket
And just like that, it’s all stitched. AND, just like that, you’re already almost finished!
Photobucket
Now, just trim all of your threads and smile!
Photobucket
Because there’s still plenty of naptime left to check up on your favorite blog! :)
Photobucket
Now, go! Make boring shirts special! Play with colors and patterns! And if you do – take a picture and add it to my Flickr pool! I love getting to see all yall’s projects!
Photobucket
Happy Friday, friends!
Disclosure of Material Connection: I received the Brother NX800 machine mentioned above for free in exchange for a mention of the product in my blog. Regardless, I only recommend products or services I use personally and believe will be good for my readers.

Related posts:

11 Responses

  1. keight dukes 27 May 2011 at 2:07 pm

    >LOVE. favorite is how super ruffled it is. also hazels tough girl face at the bottom left. this totally fits into her NYC hip architect wardrobe collection.

    Reply
  2. keight dukes 27 May 2011 at 2:09 pm

    >oh also, is there a good ratio to use for the length of ruffle material you would need : the length of the area it will be added to to make this style of super ruffle?

    Reply
  3. Shanna 27 May 2011 at 2:25 pm

    >So freaking adorable! I wish I had the talent that you have when it comes to sewing! Happy Friday to you too!

    Reply
  4. Christine 27 May 2011 at 7:52 pm

    >So. I haven't busted out my ruffler foot yet, but would that work for this? If so, I might have to make that my first easy ruffler-foot-project. Thanks for the fun and easy tute! It gives Hazel an almost Shakespearian look. :)

    vithri

    Reply
  5. Carla 27 May 2011 at 10:43 pm

    >You have some mad skills and I am definitely envious! Thankfully there are amazingly talented people, like yourself that sell these cool things.

    At some point I WILL learn how to use a sewing machine!

    Awesome work!

    Reply

Leave a Reply to Emily

XHTML: You can use these tags: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>